Gas burners that will not light often have a clogged burner cap, misaligned electrode, or a failed spark module. We clean ports, test spark output, and replace the igniter or module if needed.
A constantly clicking igniter is usually caused by moisture in the igniter well after a spill or boilover, or by a failing spark module sending constant current. We dry, clean, and test — or replace the module.
On electric stoves, a cold surface element is usually a burned-out coil element or a failed infinite switch controlling that burner. We test the element with a meter and replace the specific failed part.
Cracked or melted control knobs are a safety concern — a knob that will not fully turn to OFF is dangerous. We carry replacement knob sets for most major brands and can replace them in minutes.
A gas odor near the stove — especially when burners are off — requires immediate attention. Do not use the appliance. Turn off the gas supply and call us. We test valves, connections, and orifices for leaks.
A cracked glass-ceramic cooktop surface (on smooth-top electric stoves) is a safety hazard and must be replaced. We source and install OEM glass tops for all major brands.
Stove Repair in Matthews, NC typically costs $89–$350 depending on the specific failure and parts required. HomeHeroes charges an $89 diagnostic fee that is waived when you proceed with the repair. Call (704) 512-0111 for a same-day estimate.
Yes — HomeHeroes provides same-day stove repair in Matthews, NC. Most appointments are confirmed same-day. Call (704) 512-0111 to check today's availability.
HomeHeroes technicians in Matthews, NC service all major stove brands including Samsung, LG, Whirlpool, GE, Maytag, Frigidaire, KitchenAid, Bosch, Sub-Zero, and Viking. Call (704) 512-0111 to confirm parts availability for your model.
Continuous clicking is almost always caused by moisture inside the igniter well after a boilover or spill — or by a failing spark module that cannot stop sending current. Remove the burner cap, dry thoroughly, and if it persists, call us for a module replacement.
For electric stoves, using the working burners while one is dead is generally safe. For gas stoves, it depends on the failure type. If you smell gas or suspect a gas leak, stop using the appliance immediately and call us — gas leaks are never safe.
A cracked glass-ceramic cooktop surface cannot be patched — it must be fully replaced. We source OEM replacement glass tops for all major brands and install them correctly, including resealing around the trim.
The repair cost is typically similar for most common failures. Gas igniter and module work runs $80–$200; electric infinite switch or element replacement is in the same range. More complex gas valve work is higher.
Most stove repairs in Charlotte run $100 to $350 depending on the failure. Single burner igniter or infinite switch repair is on the lower end. Glass cooktop surface replacement and gas valve work are on the higher end.
Appliance Down? We'll Be There Today.
Same-day appointments available. Licensed technicians. 90-day warranty on all repairs.
One call connects you to every trade. Book online or call now — most Charlotte appointments confirmed within minutes.
7 DAYS A WEEK · 8AM–7PM · EMERGENCY LINE AVAILABLE